
We offer a huge range of products if you are looking to increase your van security even further. Our additional van security products include dashcams and trackers. As well as this, we have a variety of products such as anti-peel brackets, latch shield protection, loom guards and much more. All of which are supplied by leading manufacturers, giving you complete peace of mind.
Get in touch today for further details on any of our products.



Internal Shield (Side & Rear)
Internal latch shields provide protection to the internal mechanisms that
open the door. Thieves will often attempt to puncture the door skin to gain
access to the mechanisms and the latch shield prevents access via the
door latches.

External Shield / Repair Plate
£144 each for side and rear doors
£174.00 each for side doors – Extra Large plate (side only)
External shields/Repair Plates are mainly used to cover damage caused by an attack to gain access to the lock mechanisms. They can also be applied as a deterrent to such attacks.

Handle Shields are a popular and common aftermarket van security upgrade for certain vans where this is a vulnerable area for attack. The handle area of vans can be a common area for an attack as it can be as simple as forcing a screwdriver between the van’s bodywork and the factory fitted handle to the lever on the back of the lock to mimic the action of the key being turned.
Our Handle Shields act both as a visual deterrent and also as a real security upgrade to the factory standard handle and lock area. Secured fully behind the factory fitted handle, they also incorporate additional security shielding behind to offer full protection.
The Key Features Include:

Van Wiring Loom Guards are a great way of protecting easily accessible wiring looms from being cut which can potentially unlock the van allowing access. Even if the van doesn’t unlock, the cost and inconvenience of replacing the wiring loom can be high.
This has been a particular issue with the Ford Transit, Ford Transit Custom and Ford Transit Connect models where the wiring looms are extremely vulnerable. Even though a recent security upgrade has stopped the doors from unlocking following the wires being cut, thieves are still cutting the cables regardless. Compared with the cost of replacing a wiring loom, this is a low-cost but highly effective security upgrade that should be considered alongside additional products such as Ford Replacement Locks.
Utilising the van’s existing fitting points, they are easy to fit and these simple but effective products can save you a lot of time and money, whilst giving you peace of mind.
Specifically designed for each van, they are manufactured from 304 grade stainless steel and powder coated in a strong durable black finish.
The Key Features Include:

£145.00
The PedalBox is the perfect solution to deter thieves from trying to steal your vehicle entirely. It has a bright colour so is easily spotted and encases the pedals in a secure box. Criminals are able to bypass immobilisers and steal vehicles without a trace and so the PedalBox is a great feature to add to your van. It is easily installed and highly effective against vehicle thefts.
The Key Features Include:

£125.00 – (supply only)
This product is vehicle-specific and the ideal solution for protecting your catalytic converter from being stolen. The system is held in place using a variety of methods depending on which CATLOC is chosen. The kits that we supply are specific to the Dispatch GEN3 and are designed to have minimal exposure so they cannot be easily seen. The CATLOC solution is a stainless-steel shield that wraps around the Citroen Dispatch GEN3 catalytic converter and secures it to a point on the chassis with a boron chain and anti-tamper fixings, preventing it from being removed by hand tools that normally hold it all in place. We also offer a universal rectangular/cylindrical clamping system for odd shaped exhaust systems or where a bespoke product is not available.
The Key Features Include:
The L4V Van Alarm is the only 2-1 Thatcham-certified aftermarket van alarm system dedicated to light commercial vehicles.
Designed to offer complete cab and load area protection, our award-winning system is a professionally installed CAN-Bus van alarm that can be customised to suit individual or fleet security needs.
Who are L4V?
L4V are widely recognised as the industry leader in aftermarket security products for commercial vehicle markets.
L4V alarm system has been designed using their 20 years of industry knowledge to create the ultimate security solution in response to the cutting-edge van attack methods of today.
Automatically engaging when the door is shut, the L4V Anti-Peel Kit is designed to strengthen door edges and distribute force more evenly when attacked.
The L4V Anti-Peel Kit is a robust bracket and keep manufactured from high-strength stainless steel. Its vehicle-specific design ensures maximum security, and is available for the most popular vans on the road.
Independent testing concluded that the L4V Anti-Peel kit installed on a side load door helps to increase resistance to van door peeling by up to 3,000%.
We recommend using the L4V Anti-Peel Kit in conjunction with a L4V Hook Lock in the high position of the rear end of the same side load door.
Internal Shield (Side & Rear)
Internal latch shields provide protection to the internal mechanisms that
open the door. Thieves will often attempt to puncture the door skin to gain
access to the mechanisms and the latch shield prevents access via the
door latches.
External Shield / Repair Plate
£120.00 each for rear doors
£140.00 each for side doors
External shields/Repair Plates are mainly used to cover damage caused by an attack to gain access to the lock mechanisms. They can also be applied as a deterrent to such attacks.
Handle Shields are a popular and common aftermarket van security upgrade for certain vans where this is a vulnerable area for attack. The handle area of vans can be a common area for an attack as it can be as simple as forcing a screwdriver between the van’s bodywork and the factory fitted handle to the lever on the back of the lock to mimic the action of the key being turned.
Our Handle Shields act both as a visual deterrent and also as a real security upgrade to the factory standard handle and lock area. Secured fully behind the factory fitted handle, they also incorporate additional security shielding behind to offer full protection.
The Key Features Include:
Van Wiring Loom Guards are a great way of protecting easily accessible wiring looms from being cut which can potentially unlock the van allowing access. Even if the van doesn’t unlock, the cost and inconvenience of replacing the wiring loom can be high.
This has been a particular issue with the Ford Transit, Ford Transit Custom and Ford Transit Connect models where the wiring looms are extremely vulnerable. Even though a recent security upgrade has stopped the doors from unlocking following the wires being cut, thieves are still cutting the cables regardless. Compared with the cost of replacing a wiring loom, this is a low-cost but highly effective security upgrade that should be considered alongside additional products such as Ford Replacement Locks.
Utilising the van’s existing fitting points, they are easy to fit and these simple but effective products can save you a lot of time and money, whilst giving you peace of mind.
Specifically designed for each van, they are manufactured from 304 grade stainless steel and powder coated in a strong durable black finish.
The Key Features Include:
The PedalBox is the perfect solution to deter thieves from trying to steal your vehicle entirely. It has a bright colour so is easily spotted and encases the pedals in a secure box. Criminals are able to bypass immobilisers and steal vehicles without a trace and so the PedalBox is a great feature to add to your van. It is easily installed and highly effective against vehicle thefts.
The Key Features Include:
This product is vehicle-specific and the ideal solution for protecting your catalytic converter from being stolen. The system is held in place using a variety of methods depending on which CATLOC is chosen. The kits that we supply are specific to the Dispatch GEN3 and are designed to have minimal exposure so they cannot be easily seen. The CATLOC solution is a stainless-steel shield that wraps around the Citroen Dispatch GEN3 catalytic converter and secures it to a point on the chassis with a boron chain and anti-tamper fixings, preventing it from being removed by hand tools that normally hold it all in place. We also offer a universal rectangular/cylindrical clamping system for odd shaped exhaust systems or where a bespoke product is not available.
The Key Features Include: